|
|
|
|
 |
|
| Edgen Murray is the principal provider of Abrasive Resistant Pipe (Slurry Pipe) for the U.S. and Canada. With a minimum average brinell of 230,
the pipe's highly durable composition is resistant to wear and abrasive materials, yet maintains ductility and workability in the field. That makes
AR Pipe the most cost-effective option for long-term use in dredging, various mining activities, power plants and other abrasive applications. |
|
| Edgen Murray is the primary stocking distributor in the country, maintaining a preferred relationship with American Steel Pipe,
the nations preeminent AR Pipe producer. American is also unique in their capability to produce and hydrostatically test lengths
up to 100 ft., while international competitors only offer up to 50 ft. lengths. |
|
| Edgen Murray surpasses other distributors in knowledge and experience, and offers considerable expertise in flanging
and welding in the field. Mill test reports certifying chemical and physical properties are available on all AR pipe. |
|
| Elongation: |
Diameter: |
| - Minimum 20% |
- The diameter of no more than 1/32" smaller
or 3/32" larger than the tabulated outside diameter
for a distance of 4" from the end of the pipe. |
| Brinell Hardness: |
Weight: |
| - Minimum average 230 BHN |
- Each pipe joint shall not weigh less than 95%
of it's nominal weight. |
| Weld Flash: |
Length: |
| - Maximum height of 1/8," with a minimum wall
thickness of 95% of nominal wall thickness. |
- AR pipe is available in uniform lengths up to 100 ft.
with a length tolerance of plus or minus one inch. |
| Wall Thickness: |
|
| - The average wall thickness of all pipe combined
on a given rolling shall not be less than the
nominal wall thickness. |
|
|
| |
|
|
|
|
